IFP Automation

IFP Automation

Added to Cart

Categories

Click here to filter products by technical characteristics(+)

Bimba
170.5-DEEE1.38
Double-acting pneumatic air cylinder with non-lube service - Bimba (Original line air cylinder series) - 1.38" extra rod extension - 1-1/2" bore (B1-1/2") - 1/2" stroke (S1/2") - Front nose mounting - 7/16-20 UNF-2A (male) threaded rod + 3/4-16 threade...
Contact for availability
$75.30
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic cylinders
Bimba
TE-170.5-CEB2
Double-acting linear composite bearing thruster actuator with external bumpers on both ends + adjustable cushions - Bimba (Composite Bearing Thruster series) - 1-1/2" bore (B1-1/2") - 1/2" stroke (S1/2") - 2 x 1/8" NPT threaded pneumatic ports - Stainl...
Contact for availability
$798.75
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic linear actuators
Bimba
PT-196180-A2B1E
Double-acting single-shaft rack-and-pinion pneumatic rotary actuator with double rack + angle adjustment (counter-clockwise rotation) + bumpers (both sides) + rear shaft - 180° angle of rotation - Bimba (Pneu-turn series) - Rated for 294.45in-lbs (at 1...
Contact for availability
$579.90
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic rotary actuators
Bimba
OLE-1507-16FMQ-Z2
Electric linear actuator with NEMA 23 DC step. mtr. + enc. + DRV-8 drv. + piston magnet - Bimba (Original line Electric Actuator series) - 2" diam. body (150lb thrust) - 0.16" spindle pitch / lead - 7" stroke (S7") - Foot mounting / Reverse parallel mt...
Contact for availability
$2,721.35
1. Automation components
2. Motor & motion control
3. Linear electromechanical actuators
Bimba
HL-0073.75-D
Double-acting low-pressure hydraulic cylinder - Bimba (Original line hydraulic cylinder series) - 250psi max. - 5/16" bore (B5/16") - 3-3/4" stroke (S3-3/4") - Front nose mounting - #5-40 (male) threaded rod + 3/8-24 threaded mounting nut (both ends) -...
Contact for availability
$51.10
1. Liquid and hydraulic systems
2. Hydraulic actuators
3. Hydraulic cylinders
Bimba
PF7-FOR-090.375-3REE2.25
Replacement piston/rod kit assembled for reverse single-acting pulling (spring-extended) cyl. with 2-1/4" extra rod extension + rear threaded mounting holes - Bimba (Flat-1 series) - for 1-1/16" bore (B1-1/16") - for 3/8" stroke (S3/8")
Contact for availability
$37.55
1. Pneumatic systems
Bimba
C24680318-618
Pneumatic swivel T-shaped connector fitting with external HEX - Bimba (Standard series) - 1 inlet + 2 outlets (threaded + push-in design) - 1/8" NPT threaded (male) pneumatic connection (side inlet) + 2 x 3/16" push-in connectors - Gray color - Thermop...
Contact for availability
$5.91
1. Pneumatic systems
2. Pneumatic fittings
Bimba
M4V310-10-24VDC
5/2-way electrically-actuated single solenoid piloted pneumatic directional control valve (Cv 1.68) - internal pilot air supply - Bimba / MFD (M4V series - model 300) - 24Vdc solenoid control - 11mm DIN connector + 3 x 3/8" NPT threaded female ports (I...
Contact for availability
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (electrically actuated)
Bimba
CRVTA-100L-60-P-1SFL
Vacuum End-of-Arm Tooling (EOAT) with 1 x silicone vacuum cup - model #100L - Bimba / Vaccon (CRVT series) - 10"Hg (339mbar) vacuum level at 60psi (4.1bar) 1.4SCFM inlet - Push-in port (pressure inlet) + 1/4" NPTF threaded port (vacuum port equipped wi...
Contact for availability
$2,767.90
1. Robotic systems
Bimba
SBLP030SI40
Vacuum suction cup with cleats - high-temperature resistant (+200°C) - Bimba / Vaccon (SBLP series) - 30mm diameter - Round / bellows shape with 3 convolutions - Food-grade silicone suction cup - Red - Rated for -40°F...+392°F / -40°C...+200°C ambient ...
Contact for availability
$13.82
1. Pneumatic systems
2. Pneumatic actuators
3. Vacuum suction cups
Bimba
PU-250R-25
Polyurethane pneumatic air tubing - 70A Shore durometer - Bimba / Pneumadyne (PU series) - sold by length (1ft) length - Transparent red color - 1/8" inner diameter (ID) / 1/4" outside diameter (OD) - sold by length (1ft) - equivalent to PU250R25
Contact for availability
$1.20
1. Pneumatic systems
2. Pneumatic tubings
Bimba
D-2485-A-4
Non-repairable air reservoir with Aluminium end caps - Bimba (Air reservoir series) - 4" length - 2" bore (B2")
Contact for availability
$73.35
1. Pneumatic systems
Bimba
BVV70524-SAC
End plate kit - Bimba (BVV series) - 3/8" NPT threaded female ports - equivalent to #BVV70524SAC
Contact for availability
$60.89
1. Pneumatic systems
2. Pneumatic manifolds
Bimba
100601400-618
Pneumatic union T-shaped coupling fitt. - Bimba (Metric series) - 1 inlet + 2 outlets - 3 x 14mm push-in connectors - Nickel-plated brass - "T" Tee-shaped - equivalent to 100601400618
Contact for availability
$62.59
1. Pneumatic systems
2. Pneumatic fittings
Bimba
BPVA-R04-MT2T4
Single-slot Normally Closed (NC) pneumatically-actuated pinch valve with magnetic position sensing - switch track; position 2 and 4 - for washdown applications - Bimba (BPVA series) - 0.250" / 6.35mm tub. slot - 0.08" / 8/100" / 2.03mm pinch gap - 1/8"...
Contact for availability
$107.38
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (pneumatically actuated)
Bimba
PF-1-02
Replacement rod seal kit for cyl. - Bimba (Flat-1 series) - for 9/16" bore (B9/16")
Contact for availability
$2.45
1. Pneumatic systems
Bimba
PM-MC-09
Mounting clamp - Bimba - for 1-1/16" bore (1-1/16") / for 1-1/2" bore (1-1/2")
Contact for availability
$122.40
1. Pneumatic systems
Bimba
TETP-04
Replacement tooling plate for act. - Bimba (Composite Bearing Thruster series) - for 3/4" bore (B3/4")
Contact for availability
$46.74
1. Pneumatic systems
Bimba
EFL-3215-EMEE10
Double-acting load-bearing conveyor-stop / pneumatic stopper cylinder with heavy-duty mounting plate + magnetic piston - Bimba (Stopper cylinder EFL series) - 0.39" extra rod extension - 1-1/4" bore (B1-1/4") - 0.59" stroke (S0.59") - Front threaded mo...
Contact for availability
$357.60
1. Pneumatic systems
2. Pneumatic actuators
3. Pneumatic stopper cylinders
Bimba
C24320418-618
Straight bulkhead connector fitting with external HEX - Bimba (Standard series) - 1 inlet + 1 outlet - 1/8" NPT threaded (female) pneumatic connection + 1/4" push-in connector - Gray color - Thermoplastic P.B.T. body / Nickel-plated brass thread; colla...
Contact for availability
$10.84
1. Pneumatic systems
2. Pneumatic fittings
Bimba
FCPM-4-Q8-L
1-way unidirectional manual-operated flow control valve with adjustment via knurled knob + HEX lock nut - Bimba (FCP series) - 8mm O.D. tub. / 6mm I.D. tub. + G1/4 threaded male ports - Rated for 1.5...+145psi operating pressure - Nickel plated Brass b...
Contact for availability
$64.47
1. Pneumatic systems
2. Pneumatic valves
3. Flow control valves
Bimba
I-SLB40-2-200
Heavy-duty spring leveler / level compensator - Bimba / Vaccon (SLB40-2 series) - G1/8" threaded (male) connection - 2" travel / 5.83" total length - 0.24" shft. diameter - Nickel-plated steel shft. / Aluminium body - equivalent to ISLB402200
Contact for availability
$80.76
1. Pneumatic systems
Bimba
UBSB-18
Shock absorber bracket kit with 2 brackets + mounting hardware - Bimba - for 18mm bore (B18mm)
Contact for availability
$193.59
1. Pneumatic systems
Bimba
LTV-15
5/2-way mechanically-actuated pneumatic directional control valve (Cv 0.24) with lever / roller - Bimba / Mead (LTV series) - 0.16" / 4.06mm full open actuation stroke length - 5 x 1/8" NPT threaded female ports - Pneumatic spring reset - Rated for 25....
Contact for availability
$160.33
1. Pneumatic systems
2. Pneumatic valves
3. Pneumatic valves (mechanically actuated)
Bimba
PT18-PT-247180-A1C1
Replacement angle adjustment screw for rty. act. with single rack + angle adjustment (both sides) + cushion (both sides) - for 180° angle of rotation - Bimba (Pneu-turn series) - for 2" bore (B2")
Contact for availability
$23.15
1. Pneumatic systems